Browning X-Bolt 300 PRC Hells Canyon LR

• Composite Max stock offers an adjustable comb to dial-in eye-to-scope alignment and includes spacers for length of pull adjustment
• A-TACS AU Camo^® stock finish
• Heavy sporter contour fluted barrel with threaded muzzle brake on on 5/8"-24 TPI threads (thread protector included)
• Cerakote Burnt Bronze finish
• Extended bolt handle

Features:

Barrel: The X-Bolt is free-floated by bedding the front and rear of the action for stability and to help maintain barrel to stock spacing for consistent accuracy. A recessed muzzle crown helps protect the rifling from damage.

Trigger: For precise shooting in the field or off the bench, there’s absolutely no substitute for a good, predictable trigger. The X-Bolt’s new three-lever Feather Trigger provides a clean, crisp pull with no take-up or creep and minimal overtravel. The trigger is screw adjustable from 3 to 5 lbs. and factory pre-set at approximately 3 1/2 lbs. An alloy trigger housing contains the hard chromed steel components that are highly polished on all critical contact surfaces. Precise engagement angles mean the X-Bolt Feather Trigger feels light and right and stays that way through many thousands of rounds. Unlike competitors’ triggers with secondary fingerpiece levers, the Feather Trigger is designed right, from the very start.

X-Lock: Securely mounted optics are essential to the accuracy and precision of any rifle. To ensure the new X-Bolt rifle has the most stable mount possible, it features the X-Lock scope mounting system. The X-Lock system uses four screws per base, replacing the traditional two-screw system. The benefits are obvious, with the scope bases being secured at all four corners rather than only held at the center of the base. This allows for more accurate placement of the bases on the receiver. This revolutionary X-Lock system holds the base tighter to the rifle than ever before.  

Inflex Technology: The new Inflex Technology recoil pad is the most comfortable, effective pad available. That's because Inflex Technology is more than a mass of recoil absorbing material, the innovation is engineered into the pad. Underneath the material, an internal skeleton has been designed using the concept of directional deflection. When a Browning with the Inflex recoil pad is fired, the pad collapses, but instead of simply moving to the rear, directional ribs pull the comb down and away from your face for even greater shooting comfort and faster follow-ups.

Bolt Lift: A 60º bolt is something you want. Browning X-Bolt, A-Bolt and AB3 rifles have a short 60° bolt lift. Many competitors' rifles incorporate a 90° bolt lift that is not only slower and cumbersome but places the bolt near or on the rifle's scope, making the bolt more difficult to operate. The 60° bolt lift has been a hallmark of Browning bolt action rifles for over three decades.

Rotary Magazine: Several Browning firearms feature a rotary style magazine. They are distinguised by the fact that the cartridges make a circular path as the move from the "bottom" of the magazine to the top position. The Browning X-Bolt and the Browning T-Bolt are current models featuring rotary magazines. The advantage of a rotary magazine, versus one which offsets every other round to the right and left it that the cartridge is always presented perfectly in the middle. There is no left/right bias similar to a single stack magazine. 

Specs: